Hardware Switch and Load

BE2WORKS software discussion forum

Hardware Switch and Load

Postby TN-Notebooks » Tue Apr 04, 2017 6:56 pm


for the Analyzer i have to connect the Switch and to the Switch the Load ?

Whitch Transistor and Mosfet you recommend for the switch

At the Load LM317 : How many Watt should the R1 0,833 Ohm should have ?
something like this ?
http://www.tme.eu/de/details/hs200-0r82 ... 00-0r82-f/

But that Resistor have 0,820 Ohm .... is the exact resistance important for the Analyzer or can we use 0,820 Ohm
Posts: 9
Joined: Sun Apr 27, 2014 4:32 pm

Re: Hardware Switch and Load

Postby admin » Wed Apr 05, 2017 5:51 am

1. This switch is not necessary. Only if you want to discharge unattended. Use any P-channel FET.
2. Exact resistance is not important. The less resistance - the higher the current. Use resistor made of high impedance wire.
User avatar
Site Admin
Posts: 797
Joined: Thu Jul 09, 2009 6:27 pm

Return to BE2WORKS software

Who is online

Users browsing this forum: No registered users and 8 guests