bq20z70 not supported firmware PF RSVD15

BE2WORKS software discussion forum

bq20z70 not supported firmware PF RSVD15

Postby skeleton » Sun Jul 05, 2020 9:05 am

It's a battery for Medion with bq 20z70 chip. The firmware is not supported so i can't use the calibrate button. I click on clear PFF button and the safety and pf status turns to OK, but after a few seconds i get PF RSVD15. I clear it again and it comes back after a few seconds again, TDA TCA flags appear.
Can't charge or discharge battery. What does the PF RSVD15 mean?
Untitled2.png (79.4 KiB) Viewed 9156 times
Untitled.png (84.62 KiB) Viewed 9156 times
Posts: 15
Joined: Tue Apr 28, 2020 4:37 pm

Return to BE2WORKS software

Who is online

Users browsing this forum: No registered users and 3 guests